ATTACHMENT DETAILS How-to-Connect-Two-Antennas-to-One tv

How to Connect Two Antennas to One TV – Easy Solutions

Having trouble receiving over the air TV channels? I know how that feels especially when you have an important show to catch – heartbreaking, right?

The problem is normally due to the fact that TV channels use different frequencies. Some use very high frequencies (VHF) while others use ultra-high frequencies (UHF). One antennae might have trouble hopping from one kind of frequency to the other but when you hook two antennas together, you make channel hopping an easy process.

When you connect two antennas to the same TV, it becomes possible to receive TV stations in two dissimilar directions even if you don’t have an antennae rotator.

Below Watch this video and know more about Combining two TV antennas for better HDTV reception:

Additionally, linking two antennas helps better signal reception.

Nonetheless, before you link two antennas, you need to find out what type they are. In case they are directional antennas, you’ve got to figure out where to point them for the best performance.

Though this kind of installation is somewhat difficult, it can be done by any homeowner. To accomplish the task, all you need is a little elbow glue and patience.

Without further ado, let’s see what connecting two antennas to one tv is all about.

The items you’ll need for Connecting Two Antennas to One Tv :

  • check
    Channel trap or Bandpass filter
  • check
    75-ohm coaxial cable

Antennas Setup

Set up the antennas based on the manufacturer’s directions.

Remember, antennas normally generate their own electrical field; these electrical fields can affect each other, resulting in ghosting among other undesirable impacts. As a solution, place the antennas far apart. That way, you’ll have eliminated possible reception difficulties.

Ensure that the antennas have cables with the same length. Why?

If one antenna’s cable is longer, it will overpower the other antenna. Also, consider using the 75 0hm coaxial cables; they are best.

Attach one of the antennas to your TV, aiming it in the direction of the signal source. After that, run a channel scan. As soon as you’re certain the antenna is set up for the finest reception, detach the cable and connect the second antenna’s cable. Repeat the same process with the second antenna.

The idea here is to connect the antennas and get the highest number of channels possible along with the finest reception. Add up the number of channels you obtain with the two antennas and if the outcome pleases you, head to the next section.

Cable Setup

Make use of a bandpass channel trap or filter.

Keep in mind that a regular 2-antenna coupler won’t filter out the ghosting effects or prevent one antenna overpowering the other. The device only lets channels run through a unit meant for the blockage of undesirable signals.

Look for a spot to keep the unit; it should be away from electrical fields or outlets.

Attach one antenna’s cable to the “antenna in” connector, and make sure it is screwed in securely.

Attach the other antenna’s cable to the other connector.

Lastly, attach the 75-ohm coaxial cable to the “TV out” connector, which is on the box. Connect the cable’s other end to the “antenna in” slot at the rear side of your converter box.

After running a channel search, you should be able to enjoy seamless TV like never before.

Final Word

Don’t forget to keep the antennas and cables away from any sources of electrical power to steer clear of an electric shock.

And hey, feel free to leave a comment and share the post with your besties.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.